Call me
Change language:
  • Українська
  • English
  • Русский

Setting Port Forwarding on routers Linksys with property Smart Wi-Fi

Go to the router Linksys Smart Wi-Fi using a Web-interface (the default IP address of a router is 192.168.1.1).

In the left menu in the subsection “Router Settings”, click “Security” (see Fig.1).

Fig.1

Choose the tab “Apps and Gaming” (Приложения и игры) (see Fig.2).

Fig.2

Click the link “Single Port Forwarding” (Проброс одного порта) (see Fig.3).

Fig.3

Click the button “Add a new Single Port Forwarding” (Добавить новое правило) (see Fig.4).

Fig.4

In the field “Application name” (Имя приложения) enter the rule name (For example: RTSP) (see Fig.5).

Fig.5

In the field “External Port” (Внешний порт) enter the port number using which your camera will be available from the internet (for our service 8554) (see Fig.6).

Fig.6

In the field “Internal Port” (Внутренний порт) enter the port number which is set on the camera (usually by default 554) (see Fig.7).

Fig.7

In the field “Protocol” choose from the list TCP or Both (by default Both) (see Fig.8).

Fig.8

In the field “Device IP#” enter the IP address of the camera you want to access (seeFig.9).

Fig.9

Check the field “Enabled”, and then click the link “Save”. If you temporarily do not want to use this rule, uncheck the field “Enabled”. In this case the rule will remain, but will not be used (see Fig.10).

Fig.10

Click the button “Apply”, and then click “Ok” (See Fig.11).

Fig.11


Payment Methods: